A critical zone observatory dedicated to suspended sediment transport: The meso-scale Galabre catchment (southern French Alps)     

Cédric Legout  Guilhem Freche  Romain Biron  Michel Esteves  Oldrich Navratil  Guillaume Nord  Magdalena Uber  Thomas Grangeon  Nico Hachgenei  Brice Boudevillain  Céline Voiron  Lorenzo Spadini 《水文研究》2021,35(3):e14084

The 20 km² Galabre catchment belongs to the French network of critical zone observatories (OZCAR; Gaillardet et al., Vadose Zone Journal, 2018, 17(1), 1–24). It is representative of the sedimentary lithology and meteorological forcing found in Mediterranean and mountainous areas. Due to the presence of highly erodible and sloping badlands on various lithologies, the site was instrumented in 2007 to understand the dynamics of suspended sediments (SS) in such areas. Two meteorological stations including measurements of air temperature, wind speed and direction, air moisture, rainfall intensity, raindrop size and velocity distribution were installed both in the upper and lower part of the catchment. At the catchment outlet, a gauging station records the water level, temperature and turbidity (10 min time-step). Stream water samples are collected automatically to estimate SS concentration-turbidity relationships, allowing quantification of SS fluxes with known uncertainty. The sediment samples are further characterized by measuring their particle size distributions and by applying a low-cost sediment fingerprinting approach using spectrocolorimetric tracers. Thus, the contributions of badlands located on different lithologies to total SS flux are quantified at a high temporal resolution, providing the opportunity to better analyse the links between meteorological forcing variability and watershed hydrosedimentary response. The set of measurements was extended to the dissolved phase in 2017. Both stream water electrical conductivity and major ion concentrations are measured each week and every 3 h during storm events. This extension of measurements to the dissolved phase will allow progress in understanding both the origin of the water during the events and the partitioning between particulate and dissolved fluxes of solutes in the critical zone. All data sets are available at https://doi.osug.fr/public/DRAIXBLEONE_GAL/index.html .  相似文献   

2007-2017年中国沙尘气溶胶的三维分布特征及输送过程     

贾瑞  刘玉芝  吴楚樵  祝清哲  汪兵 《中国沙漠》2019,39(6):108-117

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。  相似文献   

琼东南盆地华光凹陷天然气水合物稳定带厚度的影响因素     

刘杰  杨睿  邬黛黛  金光荣  张辉 《海洋学报》2019,41(8):13-25

为了探讨琼东南盆地华光凹陷海底天然气水合物稳定带的分布规律，定量研究了静水压力、底水温度、地温梯度和气源组分对水合物稳定带的影响程度。在此基础上，分析了华光凹陷现今甲烷水合物稳定带的厚度分布。最后，综合各因素的历史演化过程，初步探讨了华光凹陷1.05 Ma BP以来天然气水合物稳定带的演化。结果表明:(1)气源组分和海底温度的变化对研究区内水合物稳定带的影响较大；水合物稳定带厚度与海底温度呈良好的线性负相关性。(2)水深超过600 m的海域具备形成天然气水合物的温压条件；超过600 m水深的海域水合物稳定带厚度大部分超过 100 m，其中西北部稳定带的最大厚度超过300 m，是有利的水合物勘探区。(3)华光凹陷1.05 Ma BP以来天然气水合物稳定带厚度经历了快速增厚–窄幅变化–快速减薄和恢复的过程。麻坑群与水合物稳定变化敏感区在空间上具有较好的叠合关系。结合前人的研究成果，推测其形成与天然气水合物的分解释放有关。  相似文献   

Seismic‐stratigraphic constraints on the age of the Faroe Islands Basalt Group,Faroe–Shetland region,Northeast Atlantic Ocean     

Jana lavsdttir  Martyn S. Stoker  Lars O. Boldreel  Morten Sparre Andersen   luva R. Eidesgaard 《Basin Research》2019,31(5):841-865

Lower Palaeogene extrusive igneous rocks of the Faroe Islands Basalt Group (FIBG) dominate the Faroese continental margin, with flood basalts created at the time of breakup and separation from East Greenland extending eastwards into the Faroe‐Shetland Basin. This volcanic succession was emplaced in connection with the opening of the NE Atlantic; however, consensus on the age and duration of volcanism remains lacking. On the Faroe Islands, the FIBG comprises four main basaltic formations (the pre‐breakup Lopra and Beinisvørð formations, and the syn‐breakup Malinstindur and Enni formations) locally separated by thin intrabasaltic sedimentary and/or volcaniclastic units. Offshore, the distribution of these formations remains ambiguous. We examine the stratigraphic framework of these rocks on the Faroese continental margin combining onshore (published) outcrop information with offshore seismic‐reflection and well data. Our results indicate that on seismic‐reflection profiles, the FIBG can be informally divided into lower and upper seismic‐stratigraphic packages separated by the strongly reflective A‐horizon. The Lower FIBG comprises the Lopra and Beinisvørð formations; the upper FIBG includes the Malinstindur and Enni formations. The strongly reflecting A‐horizon is a consequence of the contrast in properties of the overlying Malinstindur and underlying Beinisvørð formations. Onshore, the A‐horizon is an erosional surface, locally cutting down into the Beinisvørð Formation; offshore, we have correlated the A‐horizon with the Flett unconformity, a highly incised, subaerial unconformity, within the juxtaposed and interbedded sedimentary fill of the Faroe‐Shetland Basin. We refer to this key regional boundary as the A‐horizon/Flett unconformity. The formation of this unconformity represents the transition from the pre‐breakup to the syn‐breakup phase of ocean margin development in the Faroe–Shetland region. We examine the wider implications of this correlation considering existing stratigraphic models for the FIBG, discussing potential sources of uncertainty in the correlation of the lower Palaeogene succession across the Faroe–Shetland region, and implications for the age and duration of the volcanism.  相似文献   

A comparative study of energy performance of hydrostatic seafloor sediment samplers and a new high-efficiency sampler     

《Applied Ocean Research》2019

The hydrostatic energy of high-pressure seawater is a renewable and green energy source for ocean exploration and have been used to replace underwater electrical energy transmission through the cable and underwater battery pack to power seafloor equipment. The advantage of the energy supply method is the cost-effective and the robustness. In the paper, the energy performance of the existing hydrostatic seafloor sediment samplers powered by seawater hydrostatic energy are modelled and analyzed and compared. In view of the common shortcoming of existing technology, a novel hydrostatic seafloor sediment sampler is proposed. The model of energy conversion of the new sampler is built, and its energy performance is obtained. The analysis results indicate that the energy conversion efficiency of the novel sediment sampler is much higher than the existing ones, which means that the new sampler can collect much longer sample with the limited amount of hydrostatic energy. The seawater hydrostatic energy conversion system of the new sampler can also be used to power other seafloor equipment.  相似文献   

Moving load response of an axially loaded Timoshenko beam on a multilayered transversely isotropic half-space comprising different media     

Yi-Cheng Li  Shi-Jin Feng  Zhang-Long Chen 《国际地质力学数值与分析法杂志》2020,44(18):2501-2523

This paper investigates the dynamic response of an axially loaded Timoshenko beam coupled with a multilayered transversely isotropic (TI) half-space subjected to a moving load. An axial force induced by the thermal expansion is taken into account in the Timoshenko beam. The half-space considers the alternate distribution of an arbitrary number of TI elastic and poroelastic layers to model foundation soils with different properties and moisture conditions. To solve the governing equations, Fourier transform is adopted. The stratified foundation is formulated by extending an “adapted stiffness matrix method” to a more general scenario with an arbitrary number of layers. The beam is then coupled with the foundation to derive solutions to the system in the frequency-wavenumber domain. The final results in the time-spatial domain are recovered by the inverse Fourier transform. After confirming the accuracy of the method in this study, the influences of the pore water existence, the transverse isotropy of different parameters, and the axial force are investigated. It can be observed that the effect of pore water existence on the maximum beam deflection can reach 22% in this study. The transverse isotropy of the elastic and shear moduli influences the critical speed of the beam deflection by altering the phase velocity of the first wave propagation mode of the beam-foundation system. The vertical permeability coefficient is more important than the horizontal one in determining the excess pore pressure. The rise of the beam temperature (axial force) decreases the critical speed and magnifies the vibrations.  相似文献   

徐闻南山镇红树林沉积物及红树植物中重金属的累积特征与迁移规律     

罗松英  梁艺琼  陈碧珊  林梦婷  梁家新  邱锦坤 《热带地理》2019,39(3):347-356

为探究重金属在红树林沉积物及红树植物中的分布累积及迁移规律，选取了徐闻南山镇红树林为研究对象，通过测定红树林沉积物及红树植物不同部位（根、茎、叶）的重金属质量分数，运用富集因子、生物富集系数、转移系数及相关性分析等方法进行分析。结果表明：1）红树林沉积物重金属质量分数表现为铬（Cr）＞锌（Zn）＞镍（Ni）＞铜（Cu）＞铅（Pb）＞砷（As）＞汞（Hg）＞镉（Cd），为中等变异程度；除了镍（Ni）元素外，其余7种重金属未超过国家一级标准，除了铅（Pb）元素外，其余7种重金属均超过广东省土壤环境背景值，说明研究区沉积物中重金属具有一定的积累效应。2）沉积物中砷（As）、铜（Cu）、锌（Zn）、汞（Hg）、镍（Ni）、铬（Cr）富集因子值均＞1.5，说明受到轻微人为活动影响；各站位镍（Ni）富集因子值均＞5，结合研究区背景，反映了镍（Ni）受到自然和人为输入的共同影响。3）白骨壤体内重金属主要集中在根部，而红海榄体内重金属在根茎叶中分布相对均匀。白骨壤根茎叶部位的大多数重金属质量分数远高于红海榄，说明白骨壤对重金属的吸附能力比红海榄强。汞（Hg）集中分布在植物的叶片部位，且与其他重金属之间相关性不明显；推测汞（Hg）主要通过叶片吸收进入植物体内，与交通运输污染有关。4）不同红树植物对不同重金属富集能力各异，白骨壤对重金属的富集能力表现为：镉（Cd）＞砷（As）＞铜（Cu）＞锌（Zn）＞汞（Hg）＞铅（Pb）＞镍（Ni）＞铬（Cr），红海榄表现为：镉（Cd）＞铜（Cu）＞汞（Hg）＞锌（Zn）＞铅（Pb）＞砷（As）＞镍（Ni）＞铬（Cr）。白骨壤和红海榄对汞（Hg）的运移能力都较强；红海榄对镉（Cd）的富集能力和转运能力都较强，而白骨壤对镉（Cd）富集能力较强，转运能力却较弱，这说明红树植物对重金属元素的富集能力与转运能力不存在正比关系。  相似文献   

Bathymetry,substrate and fishing areas of Southeast Atlantic high-seas seamounts   总被引：1，自引：0，他引：1  

OA Bergstad  ÅS Høines  R Sarralde  G Campanis  M Gil  F Ramil 《African Journal of Marine Science》2019,41(1):11-28

Most of the Southeast Atlantic Ocean is abyssal, and global bathymetries suggest that only ～3.2% of the areas beyond national jurisdiction (ABNJ; also known as the high seas, as defined in the United Nations Convention on the Law of the Sea [UNCLOS]) are shallower than 2 500 m. This study mapped bathymetry and characterised substrates in selected seamount summit areas, including several that have been or may become fishing areas. The southernmost location, the Schmitt-Ott Seamount, has exposed volcanic bedrock with surrounding flats covered by thin biogenic sediments and/or coral rubble that appears ancient. At Wüst, Vema, Valdivia and Ewing seamounts the basaltic base appears to be overlain by coral caps and other coral substrates (sheets, rubble). Adjacent summit plains have biogenic sediments of varying thickness. Vema has a flat, roughly circular summit, <100 m deep, with the shallowest point being a 22-m-deep summit knoll; the upper slopes have ancient coral framework, but the summit has a mixture of coralline and volcanic rock and coarse sediments, including extensive areas with coralline algae and kelp forests. Valdivia Bank is a 230-m-deep, flat, rocky area (～11 × 5 km), protruding steeply from the extensive multi-summit Valdivia subarea of the Walvis Ridge. The distribution of past fisheries in the Convention Area of the South East Atlantic Fisheries Organisation (SEAFO) was considered in relation to the new information on bathymetry and substrate.  相似文献   

Flexural deformation controls on Late Quaternary sediment dispersal in the Garo-Rajmahal Gap,NW Bengal Basin     

Jean-Louis Grimaud  Celine Grall  Steven Goodbred  Michael S. Steckler  Ryan Sincavage  Jennifer L. Pickering  Chris Paola  Leonardo Seeber  Md. Saddam Hossain 《Basin Research》2020,32(5):1242-1260

Subsurface deformation is a driver for river path selection when deformation rates become comparable to the autogenic mobility rate of rivers. Here we combine geomorphology, soil and sediment facies analyses, and geophysical data of the Late Quaternary sediments of the central Garo-Rajmahal Gap in Northwest Bengal to link subsurface deformation with surface processes. We show variable sedimentation characteristics, from slow rates (<0.8 mm/year) in the Tista megafan at the foot of the Himalaya to nondeposition at the exposed surface of the Barind Tract to the south, enabling the development of mature soils. Combined subsidence in the Tista fan and uplift of the Barind Tract are consistent with a N-S flexural response of the Indian plate to loading of the Himalaya Mountains given a low value of elastic thickness (15–25 km). Provenance analysis based on bulk strontium concentration suggests a dispersal of sediment consistent with this flexural deformation—in particular the abandonment of the Barind Tract by a Pleistocene Brahmaputra River and the current extents of the Tista megafan lobes. Overall, these results highlight the control by deeply rooted deformation patterns on the routing of sediment by large rivers in foreland settings.  相似文献   

北京十三陵地区青白口系长龙山组含铁建造的发育特征及成因^*          下载免费PDF全文

张琴  王柏寒  周琛  孙祖宇  梅啸寒  原成帅  王凯 《古地理学报》2020,22(3):570-586

含铁建造在整个前寒武纪的地质记录中分布广泛,但针对华北地区青白口系长龙山组出露的含铁建造目前还没有报道。文中通过野外观察及室内XRD、SEM、ICP-MS等手段,对北京十三陵地区出露的长龙山组含铁建造的分布规律、矿物组成、成矿物质来源等开展研究,并探讨含铁建造的成因机制。结果表明,含铁建造的铁质主要为赤铁矿,与石英、海绿石等矿物伴生。含铁建造存在2种分布模式: Ⅰ型含铁建造,与海绿石伴生,产出厚度变化大(1~50 cm),偏光显微镜下海绿石砂岩和铁质条带呈互层状产出,赤铁矿具近球形结构;Ⅱ型含铁建造,无海绿石伴生,产出厚度相对较大(一般大于10 cm),镜下见黑色的富铁层夹碎屑石英透镜体,赤铁矿常发育针状或雪花状结构。依据构造演化和微量元素分析,认为含铁建造的铁质来源主要为下马岭组顶部的铁质风化壳。Ⅰ型含铁建造为化学胶体沉淀与海绿石风化的混合成因;Ⅱ型含铁建造主要属于胶体化学沉积成因,后期可能经受了糜棱化改造作用。这一结论为华北地区前寒武纪含铁建造的找矿提供了沉积地质依据,对于完善含铁建造成矿机理及华北地区元古代构造演化具有重要的意义。  相似文献